Idioma

Idioma actual
    Cambiar idioma
    Inversor de bomba solar de alta potencia para sistemas de suministro de agua a gran escala
    Inversor de bomba solar de alta potencia para sistemas de suministro de agua a gran escala
    Productos

    Inversor de bomba solar de alta potencia para sistemas de suministro de agua a gran escala

    SWP75KH-V1
    SWP90KH-V1
    SWP110KH-V1

    Introducción del producto

    The SWP75KH-V1, SWP90KH-V1 and SWP110KH-V1 solar pump inverters are designed for high-power water pumping applications that require long-term stability and strong adaptability to harsh outdoor environments. Built for large agricultural irrigation, municipal water transfer and industrial water supply, these models enable direct solar-driven pumping with intelligent MPPT control, significantly reducing electricity and fuel costs while ensuring continuous water delivery.

    Características del producto

    • High-Power Solar Pump Control. Supports three-phase AC pumps from 75kW to 110kW, suitable for deep-well and high-head pumping applications.

    • Advanced MPPT Technology. MPPT efficiency up to 99%, ensuring maximum utilization of solar energy under fluctuating sunlight conditions.

    • Wide Voltage Adaptability. Wide DC input range (recommended MPPT voltage 485–750Vdc) for flexible PV array design and stable system operation.

    • Comprehensive Protection & Reliability. Integrated protections against dry-run, over-current, over-voltage, phase loss, overheating and short circuits for long service life.

    Pregunte ahora
    Descargar hoja de datos
    HogarProductosInversor de bomba solar de alta potencia para sistemas de suministro de agua a gran escala

    Especificaciones técnicas

    SWP75KH-V1
    SWP90KH-V1
    SWP110KH-V1
    • Modelo SWP75KH-V1
      Potencia máxima del motor 75 kW
      PV Max Input Voltage 800 VCC
      Rango MPPT recomendado 485–750 VCC
      Voltaje de salida de CA 380–440 VAC, 3-Phase
      Corriente de salida nominal 150 A
      Frecuencia 50/60 Hz (±3%)
      Nivel de protección IP20
      Temperatura de funcionamiento -25°C to +50°C
      Método de enfriamiento Refrigeración por aire forzado
      Comunicación RS485
      Nivel de ruido <65 dB
      Cumplimiento EN 50178, IEC/EN 62109-1, IEC 61800
       
    • Modelo SWP90KH-V1
      Potencia máxima del motor 90 kW
      PV Max Input Voltage 800 VCC
      Rango MPPT recomendado 485–750 VCC
      Voltaje de salida de CA 380–440 VAC, 3-Phase
      Corriente de salida nominal 170 A
      Frecuencia 50/60 Hz (±3%)
      Nivel de protección IP20
      Temperatura de funcionamiento -25°C to +50°C
      Método de enfriamiento Refrigeración por aire forzado
      Comunicación RS485
      Nivel de ruido <65 dB
      Cumplimiento EN 50178, IEC/EN 62109-1, IEC 61800
       
    • Modelo SWP110KH-V1
      Potencia máxima del motor 110 kW
      PV Max Input Voltage 800 VCC
      Rango MPPT recomendado 485–750 VCC
      Voltaje de salida de CA 380–440 VAC, 3-Phase
      Corriente de salida nominal 210 A
      Frecuencia 50/60 Hz (±3%)
      Nivel de protección IP20
      Temperatura de funcionamiento -25°C to +50°C
      Método de enfriamiento Refrigeración por aire forzado
      Comunicación RS485
      Nivel de ruido <65 dB
      Cumplimiento EN 50178, IEC/EN 62109-1, IEC 61800
       

    Descripción

    Product Description & Applications

    These high-capacity solar pump inverters are ideal for regions with high water demand and limited grid access. By directly converting solar energy into pump power, the system eliminates diesel dependency and reduces operational costs.
    Typical applications include large-scale agricultural irrigation, desert greening projects, municipal water transfer, livestock water supply, mining water management and remote community water systems.

    The inverter supports fully automatic operation, soft start and soft stop, minimizing mechanical stress on pumps and pipelines while extending system lifespan.

    Q1: Can these models operate without batteries?

    A: Yes. They are designed for direct solar pumping and can run without batteries. Hybrid operation with grid or generator backup is also supported.

    Q2: Are they suitable for deep-well pumping?

    A: Yes. The high output power and stable three-phase control make them ideal for deep-well and high-head pumping systems.

    Q3: How do they protect pumps from dry-running?

    A: Built-in dry-run protection automatically stops the pump when water levels are insufficient, preventing damage.

    P4: ¿Se puede monitorear el sistema de forma remota?

    A: Yes. RS485 communication allows integration with monitoring systems for real-time status and diagnostics.

    Q5: What makes these models suitable for large projects?

    A: High power capacity, strong overload capability, intelligent MPPT control and proven reliability in long-term outdoor operation.

    Más productos
    Proyectos globales
    Más detalles

    SOLICITE UNA COTIZACIÓN O ASOCIARSE CON NOSOTROS

    Comuníquese con nuestro equipo para consultar precios, pedidos al por mayor u oportunidades comerciales.

    Por favor, activa JavaScript en tu navegador para completar este formulario.

    etiquetas:

    high power solar pumping system industrial solar water pump controller large scale solar irrigation inverter three phase solar pump VFD

    Anterior:

    Inversor de bomba solar serie SWP de JNTech (30–55 kW)

    Productos relacionados

    Hemos desarrollado una cartera diversa de soluciones de productos para satisfacer diferentes mercados y necesidades.