محول مضخة الطاقة الشمسية 5.5 كيلوواط / 7.5 كيلوواط / 11 كيلوواط
- SWP5K5H-V1
- SWP7K5H-V1
- SWP11KH-V1
مقدمة المنتج
مميزات المنتج
-
One Housing, Multiple Power Options. Simplifying inventory management and project standardization for distributors and EPC partners.
-
Wide MPPT Voltage for Higher Solar Yield. Reduces cable losses, and improves pumping hours under weak sunlight or cloudy conditions.
-
Pump-Dedicated Protection Logic. Built specifically for water pumping systems, with integrated protection. This significantly reduces pump damage and maintenance costs.
-
Hybrid Power Ready & Easy Monitoring. Supports PV + AC input, allowing grid or generator backup when needed. RS485 enables remote monitoring, fault diagnosis, and system integration.
المواصفات الفنية
- SWP5K5H-V1
- SWP7K5H-V1
- SWP11KH-V1
Item SWP5K5H-V1 Rated power (motor output) 5.5 kW. تيار الخرج المقنن 13 A. جهد الخرج المقدر 380–440 Vac (3-phase). Recommended MPPT voltage 485–750 فولت تيار مستمر. Max. input DC voltage 800 Vdc. Number of PV strings 1 string (single-string optimized). Cooling / Protection class Forced-air cooling / IP20. تواصل RS485 (Modbus). درجة حرارة التشغيل −25°C to +50°C (derating above 50°C). Dimensions (W×H×D) 247 × 160 × 175 mm. وزن 3.9 kg. Item SWP7K5H-V1 Rated power (motor output) 7.5 kW. تيار الخرج المقنن 17 A. جهد الخرج المقدر 380–440 Vac (3-phase). Recommended MPPT voltage 485–750 فولت تيار مستمر. Max. input DC voltage 800 Vdc. PV strings 1 string (single-string) . Cooling / Protection class Forced-air; IP20. تواصل RS485 (Modbus). درجة حرارة التشغيل −25°C to +50°C. Dimensions (W×H×D) 247 × 160 × 175 mm. وزن 4.0 kg. Item SWP11KH-V1 Rated power (motor output) 11 kW. تيار الخرج المقنن 22 A. جهد الخرج المقدر 380–440 Vac (3-phase). Recommended MPPT voltage 485–750 فولت تيار مستمر. Max. input DC voltage 800 Vdc. PV strings 1 string. Cooling / Protection class Forced-air; IP20. تواصل RS485 (Modbus). درجة حرارة التشغيل −25°C to +50°C (derating applies). Dimensions (W×H×D) 247 × 160 × 175 mm. وزن 4.1 kg.
وصف
وصف المنتج
The SWP-H Series inverter converts DC power generated by photovoltaic panels into stable three-phase AC power to drive water pumps directly.
During operation:
- Solar energy is tracked in real time through MPPT control
- Pump speed automatically adjusts according to solar irradiance
- Water is pumped continuously during daylight without batteries
- Optional AC input ensures uninterrupted operation when solar power is insufficient
This design eliminates fuel dependency, reduces electricity costs, and enables fully autonomous water pumping.
سيناريوهات التطبيق
- Agricultural irrigation (farms, orchards, greenhouses)
- Livestock watering systems
- Village & community water supply
- Remote off-grid boreholes and wells
- Small commercial or industrial water transfer projects
Q1: Can one inverter model be used for different pump sizes?
A: Each SWP-H inverter is matched to a specific motor power range. Selecting the correct model ensures optimal efficiency and motor protection.
Q2: Does the system work without batteries?
A: Yes. The SWP-H Series is designed for direct solar pumping, eliminating battery cost and maintenance.
Q3: Can it work with grid or diesel generator backup?
A: Yes. The inverter supports AC auxiliary input for hybrid operation when solar energy is insufficient.
Q5: Is remote monitoring supported?
A: Yes. RS485 (Modbus) communication allows connection to monitoring systems for performance tracking and fault alerts.
Q6: What type of pumps are compatible?
A: Compatible with three-phase centrifugal pumps, submersible pumps, and surface pumps within the rated power range.
احصل على عرض أسعار أو اشترك معنا
اتصل بفريقنا للحصول على الأسعار أو الطلبات بالجملة أو فرص العمل.
